| Error |
Message
|
| 600 |
An
operation is pending.
|
| 602 |
The
port is already open. |
| 603 |
The
buffer is too small. |
| 604 |
Wrong
information specified. |
| 605 |
Cannot
set port information. |
| 606 |
The
port is not connected. |
| 607 |
The
event is invalid. |
| 608 |
The
device does not exist. |
| 609 |
The
device type does not exist. |
| 610 |
The
buffer is invalid. |
| 611 |
The
route is not available. |
| 612 |
The
route is not allocated. |
| 613 |
Invalid
compression specified. |
| 614 |
Out
of buffers. |
| 615 |
The
port was not found. |
| 616 |
An
asynchronous request is pending. |
| 617 |
The
port or device is already disconnecting. |
| 618 |
The
port is not open. |
| 619 |
The
port is disconnected. |
| 620 |
There
are no endpoints. |
| 621 |
Cannot
open the phone book file. |
| 622 |
Cannot
load the phone book file. |
| 623 |
Cannot
find the phone book entry. |
| 624 |
Cannot
write the phone book file. |
| 625 |
Invalid
information found in the phone book. |
| 626 |
Cannot
load a string. |
| 627 |
Cannot
find key. |
| 628 |
The
port was disconnected. |
| 629 |
The
port was disconnected by the remote machine. |
| 630 |
The
port was disconnected due to hardware failure. |
| 631 |
The
port was disconnected by the user. |
| 632 |
The
structure size is incorrect. |
| 633 |
The
port is already in use or is not configured for Remote Access dialout. |
| 634 |
Cannot
register your computer on the remote network. |
| 635 |
Unknown
error. |
| 636 |
The
wrong device is attached to the port. |
| 637 |
The
string could not be converted. |
| 638 |
The
request has timed out. |
| 639 |
No
asynchronous net available. |
| 640 |
A
NetBIOS error has occurred. |
| 641 |
The
server cannot allocate NetBIOS resources needed to support the client. |
| 642 |
One
of your NetBIOS names is already registered on the remote network. |
| 643 |
A
network adapter at the server failed. |
| 644 |
You
will not receive network message popups. |
| 645 |
Internal
authentication error. |
| 646 |
The
account is not permitted to log on at this time of day. |
| 647 |
The
account is disabled. |
| 648 |
The
password has expired. |
| 649 |
The
account does not have Remote Access permission. |
| 650 |
The
Remote Access server is not responding. |
| 651 |
Your
modem (or other connecting device) has reported an error. |
| 652 |
Unrecognized
response from the device. |
| 653 |
A
macro required by the device was not found in the device .INF file section. |
| 654 |
A
command or response in the device .INF file section refers to an undefined
macro. |
| 655 |
The
macro was not found in the device .INF file section. |
| 656 |
The
macro in the device .INF file section contains an undefined
macro. |
| 657 |
The
device .INF file could not be opened. |
| 658 |
The
device name in the device .INF or media .INI file is too long. |
| 659 |
The
media .INI file refers to an unknown device name. |
| 660 |
The
device .INF file contains no responses for the command. |
| 661 |
The
device .INF file is missing a command. |
| 662 |
Attempted
to set a macro not listed in device .INF file section. |
| 663 |
The
media .INI file refers to an unknown device type. |
| 664 |
Cannot
allocate memory. |
| 665 |
The
port is not configured for Remote Access. |
| 666 |
Your
modem (or other connecting device) is not functioning. |
| 667 |
Cannot
read the media .INI file. |
| 668 |
The
connection dropped. |
| 669 |
The
usage parameter in the media .INI file is invalid. |
| 670 |
Cannot
read the section name from the media .INI file. |
| 671 |
Cannot
read the device type from the media .INI file. |
| 672 |
Cannot
read the device name from the media .INI file. |
| 673 |
Cannot
read the usage from the media .INI file. |
| 674 |
Cannot
read the maximum connection BPS rate from the media INI file. |
| 675 |
Cannot
read the maximum carrier BPS rate from the media .INI file. |
| 676 |
The
line is busy. |
| 677 |
A
person answered instead of a modem. |
| 678 |
There
is no answer. |
| 679 |
Cannot
detect carrier. |
| 680 |
There
is no dial tone. |
| 681 |
General
error reported by device. |
| 682 |
ERROR
WRITING SECTIONNAME |
| 683 |
ERROR
WRITING DEVICETYPE |
| 684 |
ERROR
WRITING DEVICENAME |
| 685 |
ERROR
WRITING MAXCONNECTBPS |
| 686 |
ERROR
WRITING MAXCARRIERBPS |
| 687 |
ERROR
WRITING USAGE |
| 688 |
ERROR
WRITING DEFAULTOFF |
| 689 |
ERROR
READING DEFAULTOFF |
| 690 |
ERROR
EMPTY INI FILE |
| 691 |
Access
denied because username and/or password is invalid on the domain. |
| 692 |
Hardware
failure in port or attached device. |
| 693 |
ERROR
NOT BINARY MACRO |
| 694 |
ERROR
DCB NOT FOUND |
| 695 |
ERROR
STATE MACHINES NOT STARTED |
| 696 |
ERROR
STATE MACHINES ALREADY STARTED |
| 697 |
ERROR
PARTIAL RESPONSE LOOPING |
| 698 |
A
response keyname in the device .INF file is not in the expected format. |
| 699 |
The
device response caused buffer overflow. |
| 700 |
The
expanded command in the device .INF file is too long. |
| 701 |
The
device moved to a BPS rate not supported by the COM driver. |
| 702 |
Device
response received when none expected. |
| 703 |
ERROR
INTERACTIVE MODE |
| 704 |
ERROR
BAD CALLBACK NUMBER |
| 705 |
ERROR
INVALID AUTH STATE |
| 706 |
ERROR
WRITING INITBPS |
| 707 |
X.25
diagnostic indication. |
| 708 |
The
account has expired. |
| 709 |
Error
changing password on domain. |
| 710 |
Serial
overrun errors were detected while communicating with your modem. |
| 711 |
RasMan
initialization failure. Check the event log. |
| 712 |
Biplex
port is initializing. Wait a few seconds and redial. |
| 713 |
No
active ISDN lines are available. |
| 714 |
Not
enough ISDN channels are available to make the call. |
| 715 |
Too
many errors occurred because of poor phone line quality. |
| 716 |
The
Remote Access IP configuration is unusable. |
| 717 |
No
IP addresses are available in the static pool of Remote Access IP addresses. |
| 718 |
PPP
timeout. |
| 719 |
PPP
terminated by remote machine. |
| 720 |
No
PPP control protocols configured. |
| 721 |
Remote
PPP peer is not responding. |
| 722 |
The
PPP packet is invalid. |
| 723 |
The
phone number, including prefix and suffix, is too long. |
| 724 |
The
IPX protocol cannot dial-out on the port because the computer is an IPX
router. |
| 725 |
The
IPX protocol cannot dial-in on the port because the IPX router is not installed. |
| 726 |
The
IPX protocol cannot be used for dial-out on more than one port at a time. |
| 727 |
Cannot
access TCPCFG.DLL. |
| 728 |
Cannot
find an IP adapter bound to Remote Access. |
| 729 |
SLIP
cannot be used unless the IP protocol is installed. |
| 730 |
Computer
registration is not complete. |
| 731 |
The
protocol is not configured. |
| 732 |
The
PPP negotiation is not converging. |
| 733 |
The
PPP control protocol for this network protocol is not available on the server. |
| 734 |
The
PPP link control protocol terminated. |
| 735 |
The
requested address was rejected by the server. |
| 736 |
The
remote computer terminated the control protocol. |
| 737 |
Loopback
detected. |
| 738 |
The
server did not assign an address. |
| 739 |
The
remote server cannot use the Windows NT encrypted password. |
| 740 |
The
TAPI devices configured for Remote Access failed to initialize or were not
installed correctly. |
| 741 |
The
local computer does not support encryption. |
| 742 |
The
remote server does not support encryption. |
| 743 |
The
remote server requires encryption. |
| 744 |
Cannot
use the IPX net number assigned by the remote server. Check the event log. |
| 752 |
A
syntax error was encountered while processing a script. |
